Champion
Augers with Single Bottom Flight Cutter Heads
|
This auger is suitable for hole diameter up to 24" in many soil conditions.
In larger diameters or in harder drilling, cutting teeth may be set in
a stepped back arrangement to distribute cutting forces on the auger. |
 |
|
Champion
Augers with Double Bottom Flight Cutter Heads
This auger utilizes thicker double bottom flights with teeth set across
the full diameter of the tool. The resulting balanced cutting action allows
straighter holes especially in large holes. The Double Bottom Flight Cutter
Head Auger is equipped with either single upper flighting (as shown) or
with double upper flighting. The auger shown is suitable for many soil
conditions. The double bottom flighted augers are most useful in cohesive
soils.
This design is available in diameters to 12 feet and more and with moldboard
or cross bar type reinforcement of the cutting. |
 |
|
Champion
Augers with Crossbar Cutter Heads
|
A heavy crossbar with cutting teeth spans the full diameter of the auger.
The crossbar provides an efficient means of balancing cutting forces on
the auger. This design is recommended for holes less than 24" diameter
and is most commonly used for post hole and utility pole augers. Utility
pole augers with hollow stem and capstan may be ordered to accept standard
bolt-on shank plate cutters. |
 |
|
Champion
Tapered Augers
|
Set with rotating carbide teeth the Champion Tapered Auger provides balanced
cutting action in the hardest rock conditions. In cobbles or boulders,
the same auger provides unmatched rooting and displacement action. For
tough drilling applications, in diameter of 18" to 48", this tool is recommended
for its versatility. |
 |
|
Champion
Rock Augers
Suitable for consolidated or fractured rock, the Champion Rock Auger has
the versatility to dig from top to bottom of the hole in the most difficult
of conditions. Large rotating carbide teeth are set in an exact configuration
that maximizes cutting efficiency.
Champion rock augers are available in double or single (shown) cutter flight
configurations. Sizes from 6" to 96" diameter are available. |
 |
|
Champion
Flat Augers
|
These augers are made from flat plate which is hot formed into Champion's
unique pitched bottom. The result is a tool that is an aggressive digger
yet is lighter, stronger and better balanced than other flat augers. Available
in 12" to 72" diameter and plate thickness up to 21/2"
. |
 |
|
Champion
Continuous Flight Augers
|
Champion Continuous Flight Augers are manufactured in 6" to 36" diameter
and shipped in lengths of up to 60 foot per section. Flight pitch and thickness
can be varied within the string. Hollow stem connections can be provided
for cast in place piles. |
 |
|
Champion
Horizontal Boring Augers
|
Champion Horizontal Augers are designed to withstand the high torques produced
by modern boring machines. Augers are made in diameters to enter freely
into any specified casing. Special attention is given in the design of
the connector and connector fittings to assure that their strength is consistent
with the strength of the stem being used. Square or hexagonal connectors
are available at customers option. Champion boring heads are available
with choice of conventional or conical carbide bits, or combination of
both. |
 |
|
